The turbocharger is a frequently used term, especially when you are discussing about race cars and high performance sports cars. It’s also quite common to find them in large diesel vehicles. A turbo is basically a device which can accelerate the horsepower of an engine without adding weight to it. Way back in the 1980s, you could hear the term ‘turbo’ quite a lot, and it used to be in respect to turbo skateboards, turbo razors etc. But, turbo today means something entirely different. Turbo or turbochargers refer to an induction machine that’s driven by a turbine and efficiently boosts the efficiency of the engine and the car.
The working of a turbocharger is quite similar to that of a jet engine. Though the extra power that turbochargers offer is the main reason behind its popularity, it’s not the only one. Another selling point of turbochargers is the fuel efficiency they bring with them. They use much lesser amount of fuel to produce the same amount of power as compared to non-turbo engines. So, they are likely to cause much lesser air pollution and save you tons of money. Could anything be better than that? Frankly speaking, no! So, you should definitely choose a Holden Captiva turbo from Demon Pro Parts for your ride. They are the best, authentic turbocharger suppliers in Melbourne Australia. They make sure to provide the much-needed boost to your vehicles with their turbochargers and at the most competitive prices.
An added benefit of turbo engines like iLoad Turbo is their quiet nature. They neutralize the intake sound and help your car to ride the streets without any annoying noise. The job of the turbocharger is to increase the power output and efficiency of the engine. If you are interested to install a turbocharger in your car, you might have the basic installation process on your fingertips. But, there are certain tips which are great to keep on hand while you are diving into the installation job. These will ensure that you are getting the job done right.
Real cause of failure: It’s very important for you to get to the real cause of your turbo failure before you finally replace it. People generally jump in and replace the turbocharger without seeking the root cause. There can be various reasons like wear and tear with age, poor maintenance, engine oil contamination, intake/exhaust leaks or restrictions etc.
Change of filters: Now, it’s very important that you always change your engine oil and air filters after the installation of a turbo. This will ensure that there are no air restrictions or oil pollution issues at the time of installation.
Proper cleaning: You need to properly and thoroughly clean your boost tubes and intercooler which will help you avoid disastrous engine damage. It will lead to the failure of the turbocharger upon start up. Also, oil left in the intercooler is a quite a worst case scenario for your car engine, and could lead to a lot of money spending.
Check and replace: It’s very important for you to check and ensure that the intake hoses and the tubes are in proper condition. Cracked or worn out boost hoses and tubes will cause leakages and turbo failures. So, you should do a thorough check up and replace any such boost hoses and tubes.
Remove caps/plugs: Most of people overlook or ignore while they install a new turbo, without removing one or both of its plugs. You should make sure to remove the caps or plugs which are placed in the oil drain or supply line. If you don’t remove them, it could lead to a turbo failure due to a lack of lubrication.
So, these were some of the most important turbo installation tips which will ensure a successful installation. Follow these religiously and you will have no regrets or the need to spend extra money in the long run.
Caitlyn Bell is an Arts student whose experiences in life make her really tougher than anyone else. She can lend you expert tips on diverse topics ranging from relationship to fashion, making money, health and so on. Her write-ups are a window into her thoughts and knowledge.