Laying self-glue "iron on vinyl " tiles is simple and anyone can do it. Ensuring that the outcome looks proficient and even, and that the tiles will not begin to strip up from the sub-floor following half a month of utilization, requires somewhat more exertion. Figuring out how to lay self-cement vinyl tiles is about tolerance and meticulousness. No expert devices required!
As a matter of first importance, you should ensure that the sub-floor where the tiles are being introduced is spotless and totally even. Any little knock or shallow opening will move to the vinyl, and following a couple of days your new vinyl deck will look however old as the one it might have been supplanting. Utilize self-leveling mixtures to guarantee an even surface, and on the off chance that you are laying self-glue vinyl over old vinyl or wood ensure they are in amazing condition. Now and again is only simpler to eliminate the old vinyl flooring and introduce over its sub-floor, especially if it's extremely harmed.
Vacuum tidy up and mop the room, and try to wash away any survive from glue, earth or oil that would hinder the paste on the rear of self-glue vinyl tiles adhering to the floor. Leave the sub-floor to dry, as vinyl tile establishment requires a completely dry surface for the cement to work.
To choose where you should begin to lay self-glue tiles you will initially have to track down the focal point of the room. Utilizing chalk, draw a rule between each pair of two restricting dividers, or between the room's corners on the off chance that you are introducing vinyl tiles on an inclining design. You can utilize those chalk lines to manage you in laying the principal column of self-cement vinyl tiles so they are straight and there are no lopsided edges. You might need to lay the tiles without stripping the back paper now, just to find out about the last impact.
To lay self-cement vinyl tiles you should begin structure the middle point, strip the back paper and press the tile immovably to the floor. Utilize a moving pin to guarantee there are no air bubbles, utilizing an even pressing factor over the whole tile, especially the edges. Adjust each new tile to the recently introduced one, ensuring the edges are as near one another as could really be expected. In the event that you need to slice a tile to fit in the space close to the divider, you can utilize a utility blade to do as such yet ensure you don't cut them on top of as of now introduced tiles, or you may harm them incidentally.
To lay self-cement vinyl tiles you should begin structure the middle point, strip the back paper and press the tile immovably to the floor.