Carpet Area Calculator – What is the difference betwee Carpet area, Built up area and Super Built up Area?

Buying the perfect home for yourself is one big task, you have to check a number of things that you require and desire in your home. And one of the most important things that you must check is carpet area, built up area and super built up area. Well, yes, most of us are not aware of all the information about it. Thus, in this article, we will be giving you the complete guide regarding carpet area, built up area and super built up area and the difference between these three. Also, we’ll add a basic guide for carpet area calculator and built up area calculator. Here, have a look!

What is Carpet Area?

Carpet area is the precise area that can easily be covered by a carpet within a house and is the area of the house excluding the thickness of the inner walls. If you had to lay out a wall-to-wall carpet in your entire house, the area covered would be the actual carpet area. It is the actual area you get to use in your house.

Now, we’ll tell you about the Carpet area and why it is important to keep in mind while buying a home. When you step out to buy a property, there is a lot of confusion about how carpet area is calculated and How it differs from the Built up area and Super Built up area etc.

Carpet area calculator will help you find out the actual layout area of the property that you are going to Purchase. The calculated number will give you an idea of the actual space that won’t be used. Thus, it is measured as wall to wall which means that the thickness of the wall is not counted in the carpet area. So, make sure to check carpet area before buying a home as carpet area is usually 70% of the total built-up area.

What Carpet area covers:

Rooms- Bedrooms, study, Dining room, Dressing Rooms and Other Rooms
Bathroomr
Balconies withi
Property unitr
A staircase withi
Property unitr
Kitchenr
Stores

What carpet area does not cover:

Exte
al and internal Wallsr
Common areasr
Terracer
Utility Ducts & Interior Part

How to calculate Carpet Area? (Carpet area calculator)

Here’s the tip for carpet area calculator:

Sum of all Area (Bedroom+livingroom+Balconies+Toilets) – the thickness of the inner walls = Carpet area

The carpet area is generally around 70% of the built up area. For example, let’s assume that the built up area is 1,000 sq ft then your carpet area should be around 700 sq ft as carpet area is 70% of total built up area. You will have to physically measure the dimension of property from wall to wall to get the exact measurement.

What is Built Up area?

Built up area is the area which is totally covered by internal and exte
al walls and it also includes ducts & Interior part. It is also known as the total covered area of the apartment and is the sum of carpet area, area covered by the thickness of walls and includes the terrace, balcony and other livable areas.

What built up Area covers:

Exte
al & Internal wallsr
Carpet Arear
Utility Ducts & Interior part(sewage/water pipeline, Interior part of Door and window AC ducts and shafts etc)
There also is a term which most of us are not aware of, that is Plinth/covered Area

Basically, the covered area does not include balcony and any structure called cantilever. This does not have any kind of ground support or from the lower apartment. This, however, is covered in Built up area. So, the covered area/plinth area is the area under the Roof.

How do we calculate Built up Area?

Carpet Area + Area of walls + Area of Utility & Interior part = Built Up Area

Generally, the built up area is 10 % more than the Carpet area.

Example – If Carpet area is 1000 sq.ft then the built up area would be around 1100 Sq Ft.

What is Super Built Up area?

Built up area of a property and the sum of common areas that are proportioned to the unit is called Super built up Area.

The super built up areas may include elevator, swimming pools, garden, lobby, lifts etc. But, parking does not count and it is charged separately.

Now what all is covered by the super built up area :

Built up area of the Property.
Common areas – Clubhouses, Air ducts, Pipe/shafts Duct, Lift, Staircases, Lobby, Swimming pool, Gymnasium (proportioned to the housing unit)
What it does not cover:

Roof Terrace
water tank
loftsr
Parks, Driveways, Garden, Play hubr
How do we calculated Super built up Area?

Super built up Area = Built up Area + Proportionate Common area

First, you need to know about the total common area. For example, if the common area of 10 apartments is 2500 sq.ft, then the area proportional to one housing unit would be total common area divided by the Number of apartment = 250 sq.ft per apartment.

If you don’t know the measurement of the Common area then here is a simple way to calculate it:

You can check the loading factor from the builder and calculate the super built up area by adding the loading factor to the Carpet area. The loading factor may vary from 15 to 50% depending on the place of property and may vary from builder to builder.

Super Built up Area = Carpet Area(1+loading factor)

For Carpet Area = 1,000 Sq Ft

Super Built up Area =1000 sq.ft(1+0.35)

=1350 sq.ft

Difference between carpet area, built up area and super built up area

Carpet Area:

It is the precise area within the walls where a carpet can be spread. It means the area is calculated from inner wall to wall distance inside the house. And it is nothing but the net usable area inside the house.

Built up Area:

Carpet Area + Area of ducts and walls + 1/2 the Area of the terrace

Super Built up area:

Built up area + area occupied by amenities like lifts, elevator, the veranda, swimming pools, garden, clubhouse, Staircase, lobby, lifts stairs (proportioned to the housing unit).

So, the conclusion here is that whenever you are going to buy a property keep carpet area, built up area, super built up area and carpet area calculator in mind to make a good purchase. Pay for the area which you are going to use according to the measurements of the apartment or commercial property you’ll buy.

Hope this article was useful for you.