Countless accidents are known to occur when drivers fail to check their blind spots. Furthermore, it is also the reason why such a vast majority of students fail in their driving test because of not checking the blind spot properly at the right time.

A blind spot can easily veil a cyclist or a pedestrian walking unnoticed and you taking sharp turn could lead to a collision and possible injury. And although the mirror allows the driver to get a wide angle of observation, not every part of the blind spot can be seen properly.

Here in this post; one will learn about how to properly check blind spots when driving. So let’s begin.

Checking The Blind Spot Prior To Driving Off

As a driver, it is always important to inspect the right side of the blind spot before driving off. The reason being a cyclist could be in the right blind spot, and that could lead to some serious consequences if the vehicle moves in that direction.

However, that doesn’t mean that one should ignore checking over their left shoulder if accidentally something/someone moved in the same path.

Few Smart Ways To Check Blind Spots When Driving:-

  • Whenever one moves their vehicle from a stationary position, top driving school instructor in Melbourne will teach the driver to park to the left next to the kerb. The instructor will also ask the learner to move again after checking all the control features and safety specs, and also the blind spots for changing directions to the left or right.

Furthermore, top driving courses in Melbourne will educate learners about making proper use of mirrors prior to moving the vehicle that way.

  • Proper scanning of the route is also important, and one should perform a 360-degree scan of 12-15 seconds in all environments (including blind spots) in the region.

Check for signs, roadside markings and possible hazards. Be proactive by checking both the side and rear mirrors every 5 seconds for passing vehicles and other veiled blind spots.

  • When driving on the right side of a four-lane road and one finds a vehicle passing you from the left, check the rear-view mirror and keep following it as it comes near. And as it disappears from the rear-view mirror, check the left mirror (and there it will be).

Again follow the vehicle from the side mirrors as it tries to pass and before it vanishes from the side mirror too, one can check their peripheral vision.

Without turning the head one can see that they never had a blind spot. Retry it with the mirror on the right side with any vehicle approaching, and if one finds no blind spot even for a second, then it would be best to adjust the mirrors properly.

  • Lastly, in the words of Edward Fleming- an experienced driving instructor in Melbourne:-

“The area surrounding the vehicle should be clear of any forms of hazards- be it front, side or the rear. It is difficult to control the vehicle that is at the back to the vehicle, but what one can do is check their mirrors for blind spots and their actions...

...If one comes across any instance of tailgating, lessen your speed and increase the distance to minimise possibilities of sudden halts or breaks.”

Final Words:-

For those who are still in their learning phase, comprehensive and budget-friendly driving course from a distinguished school will teach them everything about checking for blind spots.

With that, these lessons and their instructor will even share knowledge about other safe driving tips to be a responsible driver on the road.

Author's Bio: 

The author is a professional driving school instructor in Melbourne for years and has helped many learners master driving. The author also is a writer and explains to the readers about the importance of quality and comprehensive driving lessons in Melbourne.