Different Types of Retaining Walls

If you live in an area with some rough or rugged terrain, there are chances that you are planning to do a custom retaining wall design and installation. If your home has an uneven ground then an Edmonton retaining wall installation plan must be somewhere up your sleeve.

St. Albert retaining wall installation is necessary to control downhill erosion, if your house is downhill from soil lines. The same applies when your foundation is threatened by a sliding hill, when you need to manage water runoff, or you need usable land.

So what is a retaining wall? Edmonton retaining wall installation refers to a ground retaining system that uses its own mass to sustain the terrain behind them. There are many different types of retaining walls. The following are the most popular types of St. Albert retaining wall installation and information on how to determine which type of wall you may need in your yard.

A Piling retaining wall is a common type of retaining wall design. These walls are used in areas where the soil is soft. They are also used in areas that are tight or there isn’t a lot of space. Piling walls are made of vinyl, wood planks, or steel. The material is driven into the ground. These retaining walls use a tieback anchor to help the barrier stay in place. Then a cable is connected to the anchor to connect it to the retaining wall.

The Gravity St. Albert retaining wall design is the oldest and most frequently used retaining wall. They are made of heavy materials such as concrete, stone, brick, and cinder blocks. These materials are used to resist pressures from the soil and rocks behind it.

Most gravity retaining walls are only about three to four feet tall. The Gravity retaining wall design is thicker at the bottom than the top. The base of the wall is usually half of the wall’s height. You will most likely see many gravity retaining walls while driving around your neighborhood.

Cantilever Edmonton custom retaining wall installation is the most commonly used type of taller retaining wall before the introduction of modern reinforced-soil gravity walls. They are made of mortared concrete or masonry. They also contain steel reinforcements.

The cantilever retaining wall design uses a lot less material than a traditional gravity wall. Their concrete footing must be positioned into firm foundations. This type of wall operates like a beam. It is often shaped like an upside down letter T or a backwards letter L. This wall requires special engineering to make sure it will withstand the weight of the dirt.

Whether you need an extremely heavy-duty retaining wall or a smaller, more compact retaining wall, you have many options to choose from to help complete your landscaping.