Struggling hard with Netgear WiFi extender red light error? Have to reset your Netgear extender but nothing worked for you? Alas! What to do? Well, don’t panic! Here, in this post we will take you through various troubleshooting fixes to resolve the red light issue on your Netgear WiFi range extender. Keep reading!

Why you see the red LED on your Netgear Extender?

The red power LED on your Netgear extender can hamper your device experience, ranging from losing the WiFi connection to damaging your device. So, it is always better to know the exact reason behind the cause and then find the exact solution to fix it accordingly.

Given below is the list of most common reasons why you are facing red light issue on your Netgear WiFi range extender. Continue to read!

Place your Netgear WiFi extender in a non-congested and higher area of your home. The device shouldn’t receive any signal interference from your home kitchen appliances, baby monitors, cordless phones or neighboring Bluetooth or WiFi devices.

Incomplete Netgear extender setup can also let you face red light issue.

If there are unknown devices connected to your extender’s WiFi network, the device might get congested and results in red color LED issue. To prevent this, change your extender’s SSID and password. Apart from this, you can also disable the extender’s SSID in order to prevent your bandwidth from ruining.

An issue from the end of your ISP can also results in red color LED on your Netgear extender.

Also, an obsolete Netgear extender’s firmware on your device will lead you to red light issue.

In the event if the internet connection is lost or power outage during Netgear extender setup process, you will find the device showing red light.

So, now that you have become familiar with the reasons why you are seeing red color LED on your Netgear extender, let us make you aware with the ultimate solution to fix the issue. Keep reading!

Solved: Netgear WiFi Extender Red Light Issue

Firstly, let us start with some basic troubleshooting tips. If they work, you need not to go with the advance one.

Check the location where you have placed your Netgear extender. The ideal location for your Netgear extender should be neat, higher, and center location of your house.

Also, keep the device away from electronic gadgets, reflexive surface, kitchen appliances, baby monitors, etc.

Check if the electric outlet you are using to plug in your Netgear extender isn’t damaged.

Power cycle your Netgear extender. Disconnect the device from the wall socket and then reconnect it after a couple of minutes.

Update Netgear extender’s firmware via www.mywifiext.net web address on a regular basis to prevent your device from flashing red LED.

Advanced Troubleshooting Tips

Still facing red light issue on your Netgear extender? If you nod in yes, then the advance troubleshooting steps highlighted below can help you out.

Power on your computer or laptop and open a preferred web browser.

Access mywifiext login page and log in to your extender using default Netgear extender login details.

From your Netgear extender’s dashboard, locate the WiFi settings section select the “Enable Fastlane” option near it.

Now, select the bandwidth to allocate “device to extender” and “router to extender” and click on the Save button once you’re done.

If the issue is still the same, resetting your Netgear extender can help you out.

Note: Power cycling and resetting Netgear extender both are different processes. Power cycle is simply a restart and resetting will erase all the data saved on the extender bring it back to the default values as you have recently purchased.

That’s all! These were a few advance troubleshooting through which you can easily fix red light issue on your Netgear WiFi range extender.

Endnote

In the event that your Netgear extender is still showing you red light, let our qualified professionals help you out in fixing the issue for you within a matter of minutes.

Author's Bio: 

I am writer.