Scope lenses are a crucial part of your rifle scope, and cleaning them will keep you shooting straight. Scope lens covers can help protect the lenses from moisture, dirt, and debris. There are many different ways you can do this.

You can purchase a commercially available cleaning kit, use gun oil for the lens, or even baby shampoo. The best way to get rid of foggy and dirty lenses is by using a mild abrasive like toothpaste.

How often do you clean the lens of your scope? Probably not as often as you should. A dirty lens can cause a loss of clarity, which in turn causes missed shots and is also bad for your gear. If you're looking to have one less thing to worry about while hunting this year, follow these steps on how to best take care of your scope lenses.

What is Scope Lens?

Scope lenses are the lenses on your scope that help you see through to what you're aiming at. They can be made of plastic, glass or a combination of both. The most important thing about keeping them clean is their ability to transmit light and not distort it in any way.

How Do I Keep My Lenses Free From Dust And Debris?

The best way to keep dust off your lenses is by using a lint-free cleaning cloth when they get dirty. This will prevent particles from becoming embedded into the surface making it harder to remove later. Never use anything abrasive because this could scratch the coating on the lens rendering it useless for hunting purposes!

What exactly is so important about keeping the lens clean?

Cleaning the lens on your scope is important because a dirty lens will hamper your ability to see and could make it hard for you to shoot an animal. The defogging technology that's built into scopes will not work if there is too much dirt or dust on the lens.

Another one is if any oils left behind from skin contact can affect how things appear through a scope. Remember also when handling lenses always wear gloves because oil residue from hands might make them dirty in turn.

A dirty lens, especially in the area where you look through it, will hinder your vision and make it harder to see clearly.

This could lead to poorer shooting accuracy which can result in an animal not being killed cleanly or at all. It means that you'll have wasted time tracking down a wounded one who's now running around with a potentially fatal injury!

The last thing you need is for your scope lens to get blurry while looking through it because of dust particles on the surface. So keeping them clean isn't just good practice but also necessary if hunting success is what matters most to you.

How To Clean Scope Lens?

It is common that your lenses will get foggy or have scratches from particles. But keep it just like that will ruin your lenses.The owner of the huntingillustrated said that scope needs to be cleaned properly before they get worse and permanently damage your equipment. So here are the tips to clean the scope lenses properly.

Step 1: Start by unscrewing the lens from each side in a cross pattern so that they are loose enough for you to be able to remove them.

Step 2: Try not to touch anything with your fingers because oils left behind could also affect how things look through the scope.

Step 3: Place an old towel over a table and set one of the lenses out carefully (try not to let anything else fall off).

Step 4: Use another towel and wipe down all sides before removing dirt with either a cloth or lens cleaning fluid.

Step 5: Now clean your lens with a microfiber cloth.

Step 6: Use water and ammonia to create an effective cleaning solution

Step 7: Spray the solution on the lens, then wipe it off with a clean microfiber cloth.

Step 8: Get rid of any stubborn dirt by rubbing it gently with a soft toothbrush.

Step 9: Rinse thoroughly using water to remove all residue from your lens.

Step 10: Repeat steps 5-9 until you're satisfied that you have removed all dirt and debris from your scope lens.

Do not use liquid dish soap or any other kind of detergent because it can strip off the protective coating on lenses and make them appear to be foggy. Make sure you have gloves when handling your scope's lenses and always remember that oils left behind from skin contact could affect how things look through the scope.

Conclusion

Cleaning your scope lens is an important process that can be done in a few easy steps. From using water to get out stubborn dirt, to rubbing with a toothbrush for the final polish. We have provided you with all of the information you need in order to keep your optics at their best.

Before going on a hunt it will be best to clean your lenses properly. Or else you may miss the target that you actually wanted to shoot.

Author's Bio: 

Md Rasel is a professional blogger.