Installation of toilet safety rail is quite difficult and hard task however, it is necessary for the safety of your loved one and especially for the safety of your children. During and after the installation of toilet safety rail many questions emerge in the mind of people about its successful installation. If you are also going to install this safety rail and questions are emerging about its successful installation then here are some useful and important tips, which help you for the successful and safe installation of this rail. There are two main things, which are necessary and compulsory for the successful installation of toilet safety rail; these two are tools and location. Placement of rail and its location will give an idea that which tools you needed. For example, if you have a stud sensor in your tool kit it will help you to determine that where the studs are located in the wall which are necessary for the safe and secure installation of rail. Similarly, when installation of rail is on the tile of your toilet then you need two specific drill bits, which are for this purpose.

First important thing is location where you are going to install that rail. When you are installing this toilet safety rail on a best and nice bathtub the location for the placement of it handle is necessary so that anyone can sit or stand easily in bathtub by holding that handle. Here are some important tips and guidelines which will show position and height which you have to follow during installation of handle and safety rail. As from many other guidelines and guidelines of manufacturers, it is clear that you install this safety rail and handle of bathtub between 33 to 35 inches on tub from its floor. This installation can be horizontal or even you can install it at angle of 45 degree. These two location are best for the installation of safety handle and rail of you bathtub because through these installation anyone can get in or out of the bathtub much easily and safely.

Second important thing for the installation of toilet safety rail is tools, which you will use during installation. First important tool is wall stud sensor, which you will use for the location of studs in the wall where you will install safety rail. Move stud locator on wall horizontally, when it will come across any wall stud it will blink or beep. Mark that place and measure almost 16 inches from that stud to locate and mark the next stud on wall of toilet. Second important tool is bits of drill. When you have to drill in the tile of toilet, it is necessary that you use diamond tip drill bit or carbide-tipped masonry drill bit. Although diamond tip drill bits are expensive, than other however they are safe to use and last longer as compare to other bits for drilling purpose.

Author's Bio: