Reasons for the clutch failure

Despite the fact that the mechanical components installed in your car are subject to undergo depreciation due to their regular wear and tear, there are certain components like clutch, gearbox, brakes, etc, which are determined to survive for the fixed period. But, there are lots of car owners who witness problems with these parts and get them repaired or replaced them quite early before the expected time of their expiry. Well, the first reason which at the first instance seems to be responsible for this damage is the driving habits of the car owners which puts unwanted pressure on such parts due to which they fail within the period.

Let us for instance talk about the clutch system, being a car owner you must be aware of the functioning of the clutch, which makes your car move ahead as soon as you leave it. This is one of the common actions performed by all the car owners whether they own a car with a manual gear transmission system or with an automatic transmission system. So, now the question arises that why does the clutch system fail before the expected time of its survival. Interestingly, there are lots of reasons behind the failure of the clutch system, some of these reasons are mentioned below:
1. Incorrect air gap: The presence of improper air gap can be regarded as one of the reasons for clutch failure in an early age. The incorrect air gap results in the improper functioning of the whole clutch system. This problem, however, pertains to the clutch systems equipped with Seltec, Frigidaire, Sanden or GMC compressor. If the clutch system installed in your is equipped with any of such compressors, it will be better to check the armature rotor or pulley air gap.
2. Misaligned pulley belt: There are chances where the clutch system can fail due to a misaligned pulley belt. This may be due to the placement of the wrong clutch system installed on the compressor. It would be surprising to know that even the gap of 1/8mm in the alignment can result in a huge problem in the working of the clutch system.
3. Defective lead wire: The installation of the defective lead wire can also be one of the causes of clutch failure. This problem, however, occurs at the time of installation and continues as the time passes.
4. Unburnished clutch: Burnishing the process that allows the clutch to operate smoothly while pressing and leaving it. The burnishing facilitates in increasing the torque generation efficiency of the vehicle. The unburnished clutch results in the low production of the torque, thus starting the problem of clutch slipping and its failure.
5. Burnt hub or pulley: The improper voltage to the coil installed in the clutch system results in the overheating of the internal winding, resulting in the slipping of the clutch system. The pressure on the compressor due to lack of lubrication will lead the clutch to slip, thus damaging the clutch system.

Apart, from the above-mentioned reasons, there are various reasons due to which the clutch system installed in your car can create lots of problems while driving. To avoid these problems it is better to rectify the issue at the earliest under the supervision of an expert technician because if detected at the earlier stage it is quite possible to repair the clutch system rather than replacing it and putting the unwanted burden on your wallet. It would be interesting to know that there are lots of renowned clutch repairing centres in Birmingham and the surrounding areas who will get the repairing task accomplished without putting much pressure on your budget.