Pool Repair - Common Problems
For the correct repair of the pits, it is necessary to try to detect the problems in advance. In the event that the problem is structural, the vessel should be repaired and it is usually very expensive.

If the problem of the pool is of water loss (either by the installation or by the structure) you should know that it can be repaired. The first thing to do is to verify if the water loss is by the tubes or by the glass. To check it you can contact a specialized company and they will do the necessary pressure tests.

The concrete pools generate micro cracks that are not visible (since they are below the tile). The reasons for which they are generated can be several: age of the structure, movements of the land, water pressure. These micro fissures do not generate any structural problem, but they do have a water tightness.

When it comes to repairing swimming pools with pathologies, you should know that common waterproofing is not durable. That's because they cannot hold cracks larger than 0.05mm and crack.

For this reason we recommend Swimming Pool Designs Atlanta for pool repair. The system is an integral and complete system that guarantees the total sealing of the pool.

Pool Repair with the exceptional system

The system is a flexible waterproofing system for the repair of pools with a ceramic finish capable of supporting cracks of up to 3mm. It can be applied both in pools of new construction on the cement base, or on the existing tile in rehabilitation.

In addition, this system ensures the tightness between the structure and the accessories thanks to the S sealant, a waterproof, very elastic and very adherent putty to concrete and plastic.

System advantages:
• Direct application on the existing tile
• Total tightness (2.5 bar pressure) and seal critical joints
• Easy application system
• Flexible system that bridges cracks up to 3mm
• Decoupling of the structure - does not transmit the movement to the mosaic
• repair of swimming pools

FINISHING - THE IMPORTANCE OF THE GRESITE GROUTING
The grouting or grout of the usual tile is not impermeable and after a few years it decomposes and/or leaves mold. This is because the chemical resistance of the cement slurry is very limited. In addition, the cement-based grout is not waterproof and allows the water to be transparent on the joint. In this article you have more information about the pool grout.

After placing the tile over the waterproofing system, it is interesting to know that, for greater safety, we recommend grouting the tile with epoxy mortar.

This waterproofing system, being a complete system, offers the possibility of giving additional security to the glass with the epoxy grouting. It is 100% waterproof, has a lot of chemical resistance (either normal or saline chlorination) and does not discolor over the years.

In addition, EPOGROUT epoxy grout is very easy to apply (almost like a cement).

Steps:
1. Mix the three components with an electric mixer.
2. Expand the product using a hard rubber trowel. Apply the product diagonally to the joints.
3. Collect all the excesses with the same rubber trowel.
4. Immediately clean the area with water and a scotch brite scrubbing with circular movements.
5. Then pick up that "broth" with a sponge trowel.

Author's Bio: 

Hasan Root, a dream lover