Pests are bad for your property and belongings. They are worse for your health. If you have recently thought of buying a home, consider running a pest inspection. After all buying homes involve a lot of money. Since its going to be a lifelong investment unless you have further plans to shift to a new residence, you will need to ensure that the property is not infested by pests. Especially, you will need to look out for termite or rodent activities which may further lead to problems with the foundation of the structure.

A quick insight

According to experts the subterranean termites are considered the most dangerous among all. They are highly destructive and can destroy the wood works of your property to a great extent. These termites can especially damage homes or even commercial properties more than an earthquake would do. Every year, hundreds or may be thousands of homes get affected due to termite infestation.

Here is how ideally a pest inspection is conducted

Identify termite activity

One of the obvious ways to conduct Timber Pest Inspection Perth is to first identify the signs which will tell you the entire story. The tell-tale signals are firstly the mud homes these insects make. They build these mud tubes to protect themselves. Other indicators include:

  • Sagging doors and floors
  • Loose trim
  • Cracked paint
  • Cracked plaster

Watch out for the electrical wires. Termites love these areas as they provide warmth to the insects. The electrical fitting needs a check. You may find out half eaten wires as termites literally chew on these electrical works.

The ideal equipment for running a termite inspection

Some home buyers invest in Home Inspections Perth, and a part of the job is to identify any kinds of pest infestation in and around the property. Generally these professionals head towards a site with necessary equipment and gears that will help them detect infested areas soon. Normally these experts carry with them equipment and devices such as the following:

  • Tapping device
  • Moisture meter
  • Cameras to capture thermal image
  • Ladders
  • Torch
  • Binoculars
  • Knife
  • Compass
  • Magnifying glass

Their pest detection kit may also include some other sophisticated gadgets and devices to conduct the procedure.

What needs to be inspected?

Pest infestations are common in some areas. They don’t occur everywhere unless the situation has gone worse. All accessible wooden works should be investigated. These works are mainly found in areas such as the following:

  • Underneath the property
  • Under roof
  • Interiors which are hard to access
  • Surroundings
  • Fences
  • Gardens
  • Trees
  • Stumps

Pest investigators will look out for timber structures to identify signs of infestation. Look out for termite barriers. They may be at risk too.

When conducting an inspection, pest controllers or investigators look for even the earliest signs which may put a property at risk. These professionals will watch out for the susceptibility of a property to undergo termite infestation. Also, these professionals will watch out for structural damage, termite nests and wood bores.

Consider investing in a pest investigation procedure to ensure that you have settled on the right property.

Author's Bio: 

The author runs a business on Home Inspections Perth. In some recent blogs the author has mentioned about Timber Pest Inspection Perth.