Beauty of your sink could be enhanced by putting tiles around it. These tiles also protect the wooden countertop from being spoiled by moisture, as it is continuously exposed to the wet atmosphere. You'll be able to select tiles that match your sink color and style. Fixing tiles around the kitchen sink will not be a big deal and it could be accomplished effortlessly by adopting proper process and appropriate planning. You should have tiles, a self rimming sink, tile saw, appropriate adhesive, grout, notched trowel, wax pencil, sponge and caulk before you start tiling your sink.

To get a newbie, it is best to use a self rimming sink which can be the simplest one to be installed. In self rimming sink, the periphery of the sink needs not to become installed separately; rather, it is part of the sink. The rim of the sink rests on the edges of the countertop surface. This sink provides you an advantage that you do not need to be concerned in regards to the best finish and cuts of your tiles, because the tile cuts are covered under the rim of sink. The sink hole should be higher than the bowl of sink to some extent, however it should be smaller than the rim.

In the beginning, start placing the tiles on the entire surface of countertop leaving the area around the sink hole. You should keep tiling unless that you are not in a position to fit complete size tiles any more. Right after that, you have to position the tiles on the edges of the sink hole in such a way that some portion of the tile is resting on the countertop even though other is suspending over the hole. These tiles ought to be accurately aligned with the neighboring tiles. Now, it's important to cut this added portion of the tile which can be hanging more than the sink hole. Take the support of wax pencil to mark lines on each and every of these hanging tiles to indicate the place from exactly where tile should be cut. Before dislodging tiles from countertop, you should mark numbers on each and every tile so that you can bear in mind what the positions of tiles had been. You may give first number to the front center tile and keep marking numbers about the sink in sequence.

Any time you are done with numbering of tiles, take away them from the countertop and cut the tiles by the saw. Apply tile adhesive on the location from where tiles have been removed for cutting. Use notched trowel for spreading the glue. Put back all the cut tiles to their positions keeping the cut edges towards the sink hole based on their numbering. Leave them overnight to settle.

Now, spread grout in your countertop with grout float. The grouting should be performed very carefully so as to ensure that grout has been settled among the tile gaps. Give setting time of 10 minutes and then clean the surface by wiping off the extra grout from the surface of the tiles. A moist sponge should be used for cleaning. Grout demands settling time of one day therefore leave it for 24 hours and then fix the sink. The rim of the sink has to sit on the tile edges which should hide the cut edges of tiles. Sink should be caulked for correct sealing with the tiles.

is a law firm that specializes in family law and it has the top Sarasota divorce attorney and divorce lawyer St Petersburg.

Author's Bio: 

Ring Ring Marketing helps local business get more leads from online to their phone line.