Use of Water Soluble Fertilizer for Crops

For farmers, the use of fertilizers is vital for the well-being of the crops. Every soil gets depleted over time and only the application of proper nutrition brings the soil back to life. The choice of the fertilizer depends on the crop one is growing.

Macronutrients in fertilizers

Water soluble fertilizers contain differing quantities of Nitrogen, Phosphorus, and Potassium (NPK). These are the primary nutrients. It may also contain secondary and micronutrients. It contains the elements in a standardized format such as 17:8:14. This means that the formulation has 17 percent Nitrogen, 8 percent of Phosphorus, and 14 percent Potassium. The water-soluble fertilizer affects the acidity or basicity of the soil. When you want to increase the media pH you must use fertilizers that have a bigger basicity value. If you use those that have a higher acidity value, the media pH will decrease over time.

When choosing a supplier of the Water Soluble Fertilizers in Maharashtra one has to make sure that there is good quality assurance. All the standard fertilizers must conform to the industry standards. And they must maintain checks at every stage of the production. It is better if you can choose someone with a good infrastructural facility so the farmer is able to access the fertilizer at his hometown with ease.

Measuring the fertilizer

The measure of the nitrogen is in parts per million (ppm) of the solution of the water. When one uses the constant feed program, the rate is 50 to 150 ppm per application. When they apply the fertilizer intermittently, the amount of fertilizer is more as much as 200 to 400 ppm. Plants growing in high light areas need more fertilizer. You can get the exact specifications from the Agro Fertilizers Suppliers India as the needs will change from crop to crop.

The plants get many nutrients such as carbon, hydrogen, and oxygen from the air and water. These nutrients are non-mineral elements. The secondary nutrients are Calcium, Sulfur, and Magnesium. The micronutrients needed by plants include the following:

1. Zinc

2. Iron

3. Nickel

4. Copper

5. Chlorine

6. Chlorine

7. Boron

8. Manganese

9. Molybdenum

The method of application of fertilizer varies with the terrain and the crop. We classify the application of the fertilizers into four classes.

• Pellet application

• Band placement

• Placement

• Broadcasting

Placement of fertilizer means that we apply it at specific places in the soil. This may be relative to the position of the seed or not. You use this method when the amount of fertilizer is less and the root system is not developed. The soil has a low fertility level.

Deep application of fertilizer

Plough sole placement is one type of placement where the fertilizers remain at the bottom of the plough. It gets applied to the soil in a continuous band while ploughing. Deep placement remains needed when the root system is deep as in the case of paddy.

Check the supplier for timely delivery. Read the customer feedback given on the website of the supplier and see if there have been any complaints so far.