Have you recently installed a crane in the workplace? If you have purchased a crane for the first time, you may not know the reasons why and how often it requires inspection or who has the required qualification to perform the task. If you are interested in learning more about the basics of crane inspection, read the following review.

Know why a crane needs inspection

Annual inspections are necessary to maintain the functionality of the cranes. Weekly or daily use uses the important components of the crane, leading to further failure. Routine inspections can easily help identify potential problems as well as address them before any irreversible accident.

Who is qualified to perform the inspection?

Research suggests that a competent crane inspector is the one with almost 2000 hours of experience in the field, including maintenance, repair, service, functional testing and modification of cranes, as well as lifting equipment. No individual should conduct inspections without receiving formal training. The professional must have the correct knowledge of the codes and regulations related to the equipment.

The inspector must have training in the fields of:
Design and safety codes related to bridge cranes.
Federal, state and local codes and standards.
Safe operating practices for hoists and cranes.
Drafting of reports and documentation procedures.
Knowledge of hoist and crane terminology for effective communication.

Categories for crane inspection

1. Initial inspection
The initial inspection is the documented visual inspection, required just after the installation of a new hoist or crane. It is also necessary to examine the equipment that is reinstalled after a modification, repair or alteration.

2. Functional test inspection
The functionality of the crane must be tested before each shift. Inspection is required for mismatches that intervene with proper operation.

3. Frequent inspection
Frequent inspections include all aspects of functional test inspection along with examining different operational mechanisms.

4. Periodic inspection
The frequency of periodic inspection depends on the use of a crane. Cranes used for "heavy duty" and "normal duty" should be inspected annually, https://www.infrastructurepc.com/.

Author's Bio: 

Everything you need to know about crane inspections