The kitchen faucet in your home needs a replacement, and you've not done that. Here come the steps for replacement, but it seems too confusing. You can get a professional around you. If you decided to fix it on your own, then this article is the right one for you.

We have come up with the necessary steps to replace your kitchen faucet with ease, regardless of the type of valve you are using. Moreover, some guidelines will come with your new kitchen faucet, but you still need a proper guide to avoid damage, especially to your kitchen faucet with the highest flow rate.

In this case, we would walk you through the necessary steps to replace a kitchen faucet with ease. Ensure you read the steps carefully, and you can even practice or fix the kitchen faucet while reading to follow the process accordingly.

1. Removing The Drain Lines

This is one of the first steps to replace a faucet. Also, you need to turn off the hot and cold switch from the source or shutoff valves, which are usually located in the cabinet. Also, it is seen under the sink. By doing this, you have started the process of replacing your kitchen faucet.

2. Removal Of The Faucet

After you might have turned off the hot and cold switch, the next step is to remove the valve to relieve the pressure from where it was positioned. Mind you, to buy the kitchen faucet is easy, but you need to follow instructions on how to fix it.

3. Disconnecting Water Lines from the Faucet

It is a gradual process, and this third step involves the use of an adjustable wrench to disconnect water lines from the kitchen faucet. Also, if the supply lines that ensures the flow of water is old or damaged, try and replace it with a new one. To get more details about kitchen faucet, visit www.kitchenhomelet.com.

4. Removal of Nuts

After you have disconnected the water lines from the faucet, carefully remove the nuts holding the faucet through a basin wrench or a socket wrench. Also, the removal of nuts is easy; try and use the above tools to avoid warn out.

5. Measurements of Outside Holes

After removing the nuts, measure the center to center and the distance of the outside holes to ensure that the new kitchen faucet will fit in without space left.

6. Get the New Faucet Ready

Get your new plumbing ready by replacing it with the new one and also use a gasket on the lip of the plate and set the faucet in place.

After all, this has been carried out. Your new kitchen faucet is ready. Nut the valve using the basin wrench and pull out faucets, attach supply lines to the faucet, and put on your water. Remember, if there are any leakages, ensure to tighten the connection and enjoy using your new kitchen faucets.

Author's Bio: 

Hi, I am Christopher. I am blogger from USA, and writing is my passion. I love to explore creative things and learn new things. I write what i learn and share with people.