Frame Relay Stage to Point

In this lab we're going to create a Frame Relay Point to Level topology on Cisco routers. As routing Protocol will make use of EIGRP, we've utilized 2600 collection routers and 1 FR switch. On HUB Router (R1) make use of Serial subinterfaces S0/0.one and S0/0.2 to R2 and R3 with DLCIs 102 and 103 respectively. On Spoke Routers R2 and R3 use subinterface S0/0.1 with DLCIs 201 and 301 respectively.
IP addresses assigned to interfaces are as follow:
R1S0/0.1 192.168.0.1S0/0.2 192.168.1.1R2S0/0.1 192.168.0.2R3S0/0.one 192.168.one.2
For Routing the way you said will be made use of EIGRP protocol with AS1 and will disable auto summarization.
We have right here a HUB and Spoke topology, R1 is utilized as HUB Router and R2 with R3 are utilised as Spoke Routers. To get this functioning you have to do next configurations:
-First we should configure interfaces subinterfaces and FR Encapsulation for the Routers
R1
interface Serial0/0no ip addrencapsulation frame-rel
interface S 0/0.one point-to-pointip addr 192.168.0.1 255.255.255.0frame-rel interface-dlci 102
interface S 0/0.2 point-to-pointip add 192.168.1.1 255.255.255.0frame-rel interface-dlci 103
R2
interface Serial0/0no ip addencapsulation frame-relay
interface Serial0/0.one point-to-pointip address 192.168.0.2 255.255.255.0frame-rel interface-dlci 201
R3
interface Serial0/0no ip addressencapsulation frame-real
interface Serial0/0.1 point-to-pointip address 192.168.1.2 255.255.255.0frame-relay interface-dlci 301
-Now its time to arranged up EIGRP to route traffic between Spoke Routers
R1
router eigrp 1network 192.168.0.0network 192.168.1.0no auto-summary
R2
router eigrp 1network 192.168.0.0no auto-summary
R3
router eigrp 1network 192.168.one.0no auto-summary
-Lets test now neighbor relationships between R1 (HUB Router) and Spoke Routers
R1#show ip eigrp neighbors IP-EIGRP neighbors for process 1H Address Interface Hold Uptime SRTT RTO Q Seq(sec) (ms) Cnt Num1 192.168.one.2 Se0/0.2 14 00:14:55 420 2520 0 40 192.168.0.2 Se0/0.1 14 00:14:56 464 2784 0 4R1#
-Next can have ping results from R2 (Spoke Router) to R3 (Spoke Router)
R2#ping 192.168.1.2
Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.one.2, timeout is 2 seconds:!!!!!Recovery rate is one hundred percent (5/5), round-trip min/avg/max = 44/66/88 msR2#

I got numerous Information Technology Certification. I have written many articles in different ITcertification as well as he has a vast experience in IT industry. In this article I guide the students that how they can pass the exams and how can they get the certification for the latest knowledge this certification exam students click at Data Center Networking Sales Specialist Certification or visit its Data Center Networking Sales Specialist Questions its better for your bright future and will helpful to attain the IT certification for more information touch with me.