A break fluid is a word that connects to the most important braking system force created when a driver presses the pedal of the brake. Brake fluid plays an important role in the automotive industry as it transfers force from the brake pedal. When the driver presses the brake pedal onto the wheel hub, heat is generated under braking especially on situations where heavier breaking or prolonged braking is performed. In this case, the generated heat may affect the brake fluid.

If the situation got worst, the boiling point that your brake fluid can achieve becomes critical. As the temperature reaches the boiling point, vapor bubbles begin to form in the system which can potentially result in brake failure. Brake fluid serves as a lubricant of all movable parts at the same time. Brake fluids are used to prevent corrosion and have become to be compatible with rubber seals and hoses. Such compatibility allows the braking system to achieve long service while getting the best performance.

Car owners need the brake fluid as the brakes are considered to be the most important safety on a car. Without them, there is no way of slowing down or avoiding obstacles. This may seem like an obvious fact that brake fluid is an essential thing in which drivers should pay attention the most. Consider brake fluid reviews to help yourself get the best choice.

Brake Fluid Facts

The most important yet the most neglected fluids in the vehicle are the brake fluid. Brake fluid is used to transfer force under pressure coming from the master cylinder to the calipers and wheel cylinders. In order to maintain good brake-ability, the fluid should be kept away from any contamination. Commonly, drivers give no consideration to it until a brake problem show up but that could only make things harder and make trips appear to be very risky.

One of the most common elements that contaminate the braking system is the moisture. Even the most considered hygroscopic nature of brake fluid moisture may also cause car problems in the long run. The fact that the system can absorb 2% of its volume in moisture in just 12 months, braking systems are believed to retire in a short length of time. A fluid with just 3% moisture accumulation is meeting a 25% drop in the boiling point. Every time the boiling point is lowered, it can possibly denote brake fade and soften brake pedal. A lowered boiling point can even make your brakes to fail completely.

Today, new technologies arrive which allow car owners to test the brake fluid without completely draining the braking system. New technologies such as FASCAR (Fluid Analysis by Stimulation of Copper Alpha Reactions) has been used to test the fluid by simply placing a test strip into the brake fluid reservoir and compare it to the contamination chart. This will help technicians know the fluid contamination in just a few seconds.

Proper maintenance is the only key for the healthy brake system. If you noticed the system to be badly contaminated, change the fluid.

Brake Fluid Change

Most people don’t have an idea why brake fluids are needed to be changed yet they are well-informed about its importance. Nearly half of all motorists in a recent Car Care Council survey said that brake failure is on top of their list of fear among driving emergencies. Every vehicle especially those three-year-old cars, the average boiling point of the brake fluid usually dropped to a potentially dangerous level due to moisture contamination which may not anymore meet the federal requirements for good brake fluid standard.

In this case, brake fluid deserves to be changed. Bear in mind that brake fluid deteriorates after a long time of use. They have hygroscopic properties which absorb moisture during its stay in the vehicle. Moisture may come from the pipes, hoses, and joints of the car. The process goes on as the water content in the brake fluid increases and it decreases when the temperature boils. The boiling point can significantly be reduced by water contamination in which it gives a negative effect on the brake.

If you are a DIY car user you can save a lot in car repair but bringing the vehicle to expert servicing personnel remains better. Check the boiling point of your brake fluid regularly. Most vehicle manufacturers recommend that changing brake fluid is best once done at least every two years or sooner. Changing brake fluid prevents brake failure. The contamination of the fluid can make the car worse if neglected so considering them as early as you can is great.

Spending some time to change the brake fluid can also help maintain the boiling point at a safe level. If the boiling point stays at a safe level then drivers can enjoy the ride with a worry-free mind. However, changing the brake fluid of your car depends on your car itself. Always check your vehicle handbook for appropriate details.

Brake Fluid Related Failures

If you choose to underestimate your brake fluid then prepare yourself to experience brake failures. From time to time, lots of reports are spreading everywhere regarding brake failures and accidents. Some cars have no apparent fault found during brake inspection. This is because when the fluid is normal, the linings are just within specifications and the hydraulics appears to be just fine. You may also feel that the pedal feels firm and is working normally yet the brakes failed.

If you feel that there is nothing wrong with your car but your brake does not work, check your brake fluid. There might be something that made the brakes hot. If you need to change your brake fluid, check this: www.zoniv.com.

Author's Bio: 

best writer