5 Best Battery Testers Review 2019

Knowing the health status of your battery is important.

This will avoid unforeseen situations that may leave you stranded miles away from home.

A battery tester will let you know if you have to replace or charge your battery.

It also helps you to know if the normal current and voltage are being produced by the battery.

However, with many options out there it can be hard to settle on the best battery tester.

But you need not worry as we have an unbiased review of best battery testers.

Here are the 5 best Battery Testers Review 2019.

But first, have a look at the Comparison chart.

ANCEL BST500

Supports 12V and
24V battery

100-2000CCA

FOXWELL Battery
Tester BT705

Supports 12V and
24V battery

100-2000CCA

FOXWELL Battery
Tester BT780

Supports EFB and
AGM 12V and 24V batteries

100-2000CCA

SOLAR BA327

Supports 6 V and
12V battery

100-2000CCA

ANCEL BA101 Professional

Supports 12V
battery.

100-2000CCA

1. ANCEL BST500

If you need to check the battery status of on automotive, motorcycle, automotive, and outdoor appliances then ANCEL BST500.

It can accurately display the parameters of your battery in less 2.5 seconds.

You will be able to know if your battery is low, full or it is replaced or charged.

This battery tester will allow you to effectively check your car health problem without having to remove the battery from your car.

The battery tester also has an easy to read backlit display.

Better still, this battery tester allows you to print results as it has an inbuilt printer that uses a highly effective thermal paper.

Compatibility

ANCEL BST500 is compatible with 12V and 24V battery.

It can also test the Gel, AGM spiral, AGM flat plate, regular flooded and deep cycle batteries.

This battery tester also supports IEC, EN, CA, MCA, CCA, BCI, JIS, DIN, SAE and GB standards.

Pros:

• It can print out test results
• Has a backlit display making it easy to read
• It is portable
• Has a wide compatibility
• The unit is cheap

Cons:

• The unit is unstable and can display inaccurate results
• It overheats when you hold the test button for long

Who is it built for?

ANCEL BST500 can be comfortably used by average car owners who want to test the health status of their car batteries.

2. FOXWELL Battery Tester BT705

If you need to test the health status of batteries heavy-duty vehicle and passenger vehicles then check on FOXWELL Battery Tester BT705.

You notice that it supports a number of tests in 12V as well as 24V batteries.

Such tests include the crank tests and charging system tests.

The crank test allows you to access information on starter system, cranking time, and cranking voltage in milliseconds.

As a result, you will be able to know if your starter motor is functioning correctly.

On the other hand, the charging system allows you to effectively check if the output voltage is within the normal range, the charging current is normal, and if the rectifier diode is working normally.

Compatibility

FOXWELL Battery Tester BT705 is compatible with 12V and 24V battery.
It can also test the Gel, AGM spiral, AGM flat plate, regular flooded and deep cycle batteries.

This battery tester also supports IEC, EN, CA, MCA, CCA, BCI, JIS, DIN, SAE and GB standards

Pros:

• Has premium and high-quality copper clips
• It has a long cable that allows you to test from a comfortable position.
• Can test heavy-duty trucks and passenger cars
• It is easy to use
• It can quickly retrieve tests
• It has temperature compensating mechanism
• Supports multiple languages

Cons:

• It is about 30% to 40% down on CCA.
• It doesn’t go back to the main menu and you need to disconnect

Who is it for?

This is built for average car owners and mechanics who wants to test the health status of their cars.

3. FOXWELL Battery Tester BT780

FOXWELL Battery Tester BT780 is an effective battery tester that aims to test the start-stop EFB and AGM batteries.

You will also notice that the battery tester is primarily built for 12V Gel, AGM spiral, AGM flat plate, regular flooded batteries.

It can also test the cranking system on 12V and 24V charging and starting system.

Besides, it supports advanced ripple voltage and conductance tests that allow technicians to quickly diagnose faults within the battery system.

Compatibility

FOXWELL Battery Tester BT780 is compatible with 12V and 24V battery.
It is primarily built to test EFB and AGM batteries.

But it can also test AGM spiral, AGM flat plate, regular flooded and deep cycle batteries

This battery tester also supports IEC, EN, CA, MCA, CCA, BCI, JIS, DIN, SAE and GB standards.

Pros:

• It is accurate as it uses advanced conductance technology
• It can print result using the built-in thermal printer
• The battery tester is easy to use
• It comes with replaceable high-quality lines
• Can support tests in multiple batteries
• Does not emit sparks and light and therefore do not overheat.
• It is multilingual

Cons:

• The length of the test leads is short
• It is not stable

Who is it built for?

FOXWELL Battery Tester BT780 is built for average car owners and technicians.

4. SOLAR BA327 20-2000 CCA Electronic Battery

SOLAR BA327 offers tests solution for 6V as well as 12V batteries.
It can also check the charging system in 6, 12, and 24V batteries.
This battery has an operating range of 1.5-30V as well as a testing capacity of 40-2000 CCA.

The outstanding aspect about this tester is that it walks you testing sequence, and promptly availing important testing results.

You will also get view results from backlit screen allowing you to have a clear view even in low light.

Compatibility

SOLAR BA327 is compatible with 6V and 12V battery.

It can also check battery system on 6, 12, and 24V batteries.

It can also test the Gel, AGM spiral, AGM flat plate, regular flooded and deep cycle batteries.

This battery tester also supports IEC, EN, CA, MCA, CCA, BCI, JIS, DIN, SAE and GB standards

Pros:

• It has a 10 feet cable
• It integrates the thermal printer
• It has a large buttons making it easy to operate
• Have adjustable backlit screen
• Test different type of battery types

Cons:

• It can overheat when you hold the test button for long
• It is not stable as it can display different results for two tests done minutes apart.

Who is it built for?

This is built for average car owners and mechanics that are looking to test the health of their car batteries.

5. ANCEL BA101 Professional

When you need to perform battery test that covers wider tests range then you need ANCEL BA101 Professional 12V.

The battery test can accommodate a test range of 100-2000CCA.

Besides, the unit can test battery voltage, cranking power, charge, and the life left in your battery.

The battery tester can access starter cranking conditions as well as alternators charging conditions.

It also supports load voltage, ripple status, and unloaded voltage.

Compatibility

ANCEL BA101 Professional 12V is compatible with 12V batteries.

It can also test the Gel, AGM spiral, AGM flat plate, regular flooded and deep cycle batteries.

This battery tester also supports IEC, EN, CA, MCA, CCA, BCI, JIS, DIN, SAE and GB standards.

Pros:

• It has four buttons that enhance ease of use
• Has a wide test range
• Can display accurate results in seconds
• It has a large LCD making it easy to read
• Can test the conditions of a fully discharged battery

Cons:

• It overheats when you hold the test button for long
• It cannot print test reports

Recommendations

Battery testers can dramatically change how you maintain the health status of your car battery.

However, with many batteries tester in the market finding an excellent battery tester can be difficult.

To make it even easier for you we have three top picks battery tester.

Our first pick includes the ANCEL BST500.

This comes at the top of our list because it has wide test coverage, tests 12V and 24V battery, and is incredibly fast.

Our second pick is the SOLAR BA327 20-2000 CCA Electronic Battery.
This is because it can it can support 6V as well as 12 Vbattery tests.

Our last pick is ANCEL BA101 Professional.

It is has a wide coverage, easy to use, and produce accurate and consistent test results.

Bottom line

A battery tester is a must-have gadget as it allows you to easily test the status of your battery.

You will be able to make the right decisions based on the displayed results.
The good is that battery testers are cheap and really easy to use.